Skip to main content
Share:

Intelligent Duct Smoke Detector Housing


The SIGA-DH Duct Smoke Detector Housing is specially engineered to exploit all the capabilities of Signature Series intelligent photoelectric and multisensor smoke detectors. Signature Series detectors gather analog information from each of their one or more sensing elements and converts it into digital signals.

The detector’s onboard microprocessor measures and analyses these signals. It compares them to historical readings, time patterns and known characteristics to make an alarm decision. Digital filters and complex Algorithms are applied for optimum detector accuracy. Unwanted alarms are virtually eliminated.

Each duct housing is packaged with detailed installation instructions, gaskets and a self-adhesive drilling template for locating and mounting the detector. The large access door is completely removable to allow fast detector installation and field wiring connections. The 16 gauge steel housing is finished in red baked enamel for easy identification. Five one-gang knockouts on the housing provide a convenient location for mounting intelligent Signature Series modules.

The SIGA-DH Duct Housing comes with a 150 mm exhaust tube. Air sampling tubes are available in lengths from 200 mm to 3048 mm and must be ordered separately. Compatible smoke detectors, mounting bases, and accessories are listed in the Ordering Information. Refer to individual device catalogue literature pages for more detail.
  • Suitable for high air velocity duct applications Up to 20.3 m/sec. with Photoelectric Detector
  • Standard Signature Series detectors Designed for use with standard 4D, 3D, and Photoelectric Signature Series smoke detectors. Does not require “special” duct smoke heads
  • Standard, relay, or isolator detector base Detector plugs-in to base then easily installs into housing
  • Install in ducts up to 3.05m wide 
  • Remote LED and test station accessories 
  • Designed and manufactured to ISO 9001 standards
  • UL
  • ULC
  • FM
  • MEA
  • Suitable for high air velocity duct applications Up to 20.3 m/sec. with Photoelectric Detector
  • Standard Signature Series detectors Designed for use with standard 4D, 3D, and Photoelectric Signature Series smoke detectors. Does not require “special” duct smoke heads
  • Standard, relay, or isolator detector base Detector plugs-in to base then easily installs into housing
  • Install in ducts up to 3.05m wide 
  • Remote LED and test station accessories 
  • Designed and manufactured to ISO 9001 standards
  • UL
  • ULC
  • FM
  • MEA