Share:
LHD Bracket (7) with sleeve LHD Bracket (7)
LHD Bracket (7) with sleeve
Overview
The ACA-B706 series 7-bracket (pipe clip) is designed to utilise existing pipework running through the protected area as a fixture for the linear heat detection cable. The ACA-B706 is designed to fit any pipe diameter. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.
Installation
The ACA-B706 should be fitted to the underside of the pipe and secured in place using suitable cable ties or strapping. The hole in the end of the bracket allows for the securing of the sensor cable using a silicon sleeve and cable tie. Alternatively an I-bracket (distance piece) may be connected to the 7-bracket to extend the position of the sensor cable. Without an extension the 7-bracket (pipe clip) supports the sensor cable approximately 60mm below the pipe.
Recommended spacing: 1m.
- Easy installation of linear heat cable
- For use on existing pipes in the area
- Available in zintec or stainless steel
- Available in quantities of 25 or 100
- Easy installation of linear heat cable
- For use on existing pipes in the area
- Available in zintec or stainless steel
- Available in quantities of 25 or 100