Share:
Marine ADS™ Clean Agent Fire Suppression System Marine ADS™
Marine ADS™ Clean Agent Fire Suppression System
With the patented-technology of “piston flow”, the ADS System is capable of delivering greater mass flow rates (2.5 to 3 times faster) than a standard clean agent system. This innovation allows networking of longer pipe runs in complex configurations with smaller pipe sizes for protection of larger hazard areas.
These characteristics allow the ADS System to be a virtual “drop-in” replacement for existing Halon 1301 systems. Most installations will require only new nozzles and agent storage cylinders and can use most of the existing pipework—providing substantial savings when retrofitting existing systems.
These characteristics allow the ADS System to be a virtual “drop-in” replacement for existing Halon 1301 systems. Most installations will require only new nozzles and agent storage cylinders and can use most of the existing pipework—providing substantial savings when retrofitting existing systems.
Clean Agent Characteristics Defined by NFPA 2001
- They are volatile, non-conductive gases
- They leave behind no residue of any kind
- They are safe for use in occupied areas when properly designed
- They are environmentally acceptable to the EPA
ADS Suppression Agents Offered by Kidde Fire Systems
- FM-200™ (HFC-227ea)
- 3M™ Novec™ 1230 Fire Protection Fluid
- Clean, leaves behind no residue
- Safe for discharge into occupied spaces
- Cost effective engineered system, providing maximum protection
- Tested and approved with all of Kidde's various detection and control options
- Sustainable technology providing an environmentally-consciencious solution
- Offers higher cylinder fill capacities for more efficient agent storage
- Increased agent flow rates and distances provide better coverage for larger hazard areas
- Smaller piping diameter results in installation cost savings
- Discharges the suppression agent into the hazard in seconds
- UL Listed
- EPA Listed
- FM Approved
- USCG Approved
- Clean, leaves behind no residue
- Safe for discharge into occupied spaces
- Cost effective engineered system, providing maximum protection
- Tested and approved with all of Kidde's various detection and control options
- Sustainable technology providing an environmentally-consciencious solution
- Offers higher cylinder fill capacities for more efficient agent storage
- Increased agent flow rates and distances provide better coverage for larger hazard areas
- Smaller piping diameter results in installation cost savings
- Discharges the suppression agent into the hazard in seconds
- UL Listed
- EPA Listed
- FM Approved
- USCG Approved