Share:
StatX Electrical Generators (pre-engineered)
Upon detection of a fire, Stat-X electric generators are operated automatically from a suitable listed releasing device.
Upon activation, the generators produce an exceptionally effective, ultra-fine, potassium based aerosol. Unlike gaseous systems, Stat-X aerosol generators are cost effective to install and maintain — as they do not require the pressure vessels, piping, or expensive installation costs associated with other extinguishing systems.
Space and weight requirements are minimal. On an agent weight basis, Stat-X aerosol is ten (10) times more effective than gaseous agent alternatives.
The Stat-X generator’s effectiveness is a function of its patented design, aerosol composition, and ultra-fine particle size. Fire suppression is rapidly achieved through interference between the ultra-fine aerosol particulate and the flame’s free radicals — terminating propagation of the fire.
Stat-X aerosol generators are virtually maintenance free and have a service life of over fifteen (15) years. This, coupled to their low installation cost, makes them an extremely cost effective fire protection solution.
- Effective Agent Performance: Highly effective based on required density
- Compact Modular Design: Offering adaptable design especially when space and weight are critical
- Simple and Economic Installation: No expensive labor-intensive piping is required
- Durable: Ideal for harsh environments and remote locations
- Long service life: Service life of fifteen (15) years
- Virtually Maintenance Free
- Environmentally Friendly: EPA SNAP listed for normally occupied and unoccupied spaces
- Zero Global Warming Potential (GWP) and zero Ozone Depletion Potential (ODP) based on EPA SNAP list inclusion
- Made in the USA
Available in the following sizes:
- 30E (30g aerosol mass)
- 60E and 60ME (60g aerosol mass)
- 100E (100g aerosol mass)
- 250E and 250ME (250g aerosol mass)
- 500E (500g aerosol mass)
- 1000E and 1000ME (1000g aerosol mass)
- 1500E (1500g aerosol mass)
- 2500E (2500g aerosol mass)
- Agent Container: The generator housing is constructed of exterior and interior stainless steel shells separated by an insulating material. The top and bottom of housing is stainless steel and incorporate a 3/4″ NPT fitting to enable direct connection to conduit on our electrical units. The housing is sealed with a non-permeable membrane and incorporates a mechanical means to ensure rupture of the membrane upon activation. The housing is non-pressurized prior to system activation.
- Finish: Brushed stainless steel. Units have passed salt spray corrosion testing per UL 2775 Standard as part of their listing.
- Aerosol Agent: The aerosol generated is potassium based and manufacturer shall provide fifteen (15) minute time weighted average data from an independent United States laboratory demonstrating that the aerosol does not produce (at normal design concentrations) harmful levels of CO, CO2, and NOx based on NIOSH standards. The product has no ozone depletion potential and no global warming potential. Agent is approved for commercial sale by the US EPA.
- Listing: Aerosol generators are listed by Underwriter’s Laboratories of Canada to UL 2775 Standard.
- System: Extinguishing system is accomplished by means of distributed generating devices to ensure distribution of extinguishing aerosol throughout the protected volume. Devices are capable of being supervised.
- Mounting: Generator devices shall be mounted by means of stainless steel bracketing that allows for directional adjustment through both vertical and horizontal plane.
- Operation/Storage Parameters:
Temperature: -40°C to +54°C
Relative Humidity: up to 90% at +35°C
Dangerous Goods Transportation Classification:
- For transporting by public highway, rail, marine vessel or cargo aircraft only: Special Permit DOT-SP 20600 authorizes transport as Proper Shipping Name: UN3268 Safety Devices 9.
- For shipment by passenger air: International Air Transport Association (IATA) regulations authorize the Proper Shipping Name: UN0432 Articles pyrotechnic 1.4S
- Shipping Limitations:
Ground: Placards required for any shipment of >1001 lbs. as UN0432 1.4S
Max. Net Qty/Pkg: Cargo Air 100 kgs
Max. Net Qty/Pkg: Passenger Air 25 kgs
- ActivFire
- UL Listed
- ULC Listed
- IECEx
- ATEX
- SBF 128:1
- Standards Institution of Israel
- Abu Dhabi Civil Defense
- Dhabi Civil Defense
- Oman Ministry of Environment
- Saudi Civil Defense
- Egyptian Civil Defense Approval
- Taiwan Fire Authority Certificate
- Automatic Extinguishing Systems Manual Approval
- ABNT
- Karnataka Fire & Emergency Services
- Qatar Certificate
- Effective Agent Performance: Highly effective based on required density
- Compact Modular Design: Offering adaptable design especially when space and weight are critical
- Simple and Economic Installation: No expensive labor-intensive piping is required
- Durable: Ideal for harsh environments and remote locations
- Long service life: Service life of fifteen (15) years
- Virtually Maintenance Free
- Environmentally Friendly: EPA SNAP listed for normally occupied and unoccupied spaces
- Zero Global Warming Potential (GWP) and zero Ozone Depletion Potential (ODP) based on EPA SNAP list inclusion
- Made in the USA
Available in the following sizes:
- 30E (30g aerosol mass)
- 60E and 60ME (60g aerosol mass)
- 100E (100g aerosol mass)
- 250E and 250ME (250g aerosol mass)
- 500E (500g aerosol mass)
- 1000E and 1000ME (1000g aerosol mass)
- 1500E (1500g aerosol mass)
- 2500E (2500g aerosol mass)
- Agent Container: The generator housing is constructed of exterior and interior stainless steel shells separated by an insulating material. The top and bottom of housing is stainless steel and incorporate a 3/4″ NPT fitting to enable direct connection to conduit on our electrical units. The housing is sealed with a non-permeable membrane and incorporates a mechanical means to ensure rupture of the membrane upon activation. The housing is non-pressurized prior to system activation.
- Finish: Brushed stainless steel. Units have passed salt spray corrosion testing per UL 2775 Standard as part of their listing.
- Aerosol Agent: The aerosol generated is potassium based and manufacturer shall provide fifteen (15) minute time weighted average data from an independent United States laboratory demonstrating that the aerosol does not produce (at normal design concentrations) harmful levels of CO, CO2, and NOx based on NIOSH standards. The product has no ozone depletion potential and no global warming potential. Agent is approved for commercial sale by the US EPA.
- Listing: Aerosol generators are listed by Underwriter’s Laboratories of Canada to UL 2775 Standard.
- System: Extinguishing system is accomplished by means of distributed generating devices to ensure distribution of extinguishing aerosol throughout the protected volume. Devices are capable of being supervised.
- Mounting: Generator devices shall be mounted by means of stainless steel bracketing that allows for directional adjustment through both vertical and horizontal plane.
- Operation/Storage Parameters:
Temperature: -40°C to +54°C
Relative Humidity: up to 90% at +35°C
Dangerous Goods Transportation Classification:
- For transporting by public highway, rail, marine vessel or cargo aircraft only: Special Permit DOT-SP 20600 authorizes transport as Proper Shipping Name: UN3268 Safety Devices 9.
- For shipment by passenger air: International Air Transport Association (IATA) regulations authorize the Proper Shipping Name: UN0432 Articles pyrotechnic 1.4S
- Shipping Limitations:
Ground: Placards required for any shipment of >1001 lbs. as UN0432 1.4S
Max. Net Qty/Pkg: Cargo Air 100 kgs
Max. Net Qty/Pkg: Passenger Air 25 kgs
- ActivFire
- UL Listed
- ULC Listed
- IECEx
- ATEX
- SBF 128:1
- Standards Institution of Israel
- Abu Dhabi Civil Defense
- Dhabi Civil Defense
- Oman Ministry of Environment
- Saudi Civil Defense
- Egyptian Civil Defense Approval
- Taiwan Fire Authority Certificate
- Automatic Extinguishing Systems Manual Approval
- ABNT
- Karnataka Fire & Emergency Services
- Qatar Certificate