Share:
StatX Electrical Generators (marine) StatX Electrical Generators (marine)
StatX Electrical Generators (marine)
Developed and manufactured by Kidde in Australia to meet the requirements of the demanding Marine environment. The MV panels have a comprehensive feature set and are configurable to allow the fire protection system to be tailored to meet individual customer or equipment requirements. Detection and actuation circuits are supervised. The panels incorporate an event log capable of storing up to 600 events, a manual release, audible and visual alarms in a single IP65 rated metal enclosure.
The MV Panel:
- Supports automatic fire detection and alarm functionality
- Display provides visual indications of system status, alarms, and faults
- Incorporates a manual discharge switch (fire system discharge) to allow the manual operation of the fire suppression system
- Workboats
- Fishing Vessels
- Tugs, Towboats & Ferries
- Search & Rescue
- Law Enforcement Vessels
- Hi-speed Vessels & Hovercraft
- Combat Craft & Special Ops
- Offshore Rigs & Platforms
- Pleasure Craft
- Electrical Equipment and Cabinets
- Switch and Control Rooms
- Pumps and generators
- Transformer/Inverter enclosures
- Equipment machinery spaces
Electrical field connections:
- IP65 rated Deutsch DT series connectors
Enclosure:
- IP65 rated metal enclosure
Indications:
- Alarm: red LED
- Buzzer
- Discharged: red LED
- Fault: amber LED
- Isolated: amber LED
- Power: FAULT amber LED
- Power: ON green LED
- Predischarge: amber and red LEDs
Inputs:
- 1 detection input suitable for use with Hochiki conventional smoke or thermal detectors, or LHD cable and thermal probes
- 1 discharge confirmation input (latching)
- 2 external power inputs – nominal 12 V or 24 V (8 V DC to 30 V DC)
Manual Controls:
- ACK/TEST: push button used to:
Test (panel idle): Operates all audible and visual indicators and auxiliary output
Acknowledge: Suppresses audible fault and alarm indications - ARM push button with configurable delay timer periods of: 0 (default), 5, 10, 15, 20, 30, 40 and 60 sec
- DIM: Push button used:
In the normal state to adjust the brightness of the LED indicators
In a FAULT state to provide access to the faultfinding diagnostic function (common system faults) - Fault: Fault finding function
- Fire System Discharge: Missilestyle switch
- FUNC.: Push button used in combination with other panel buttons, allows users to perform additional functions
- Isolate: Switch located on panel printed circuit board (PCB).
Used to isolate the discharge output for testing purposes - System Reset: Used to reset panel following fault or alarm indications
Outputs:
- 1 auxiliary output, rated for 2 amps, – used to switch panel incoming power supply voltage (default configuration). The auxiliary output can be configured if desired to provide a continuous DC power supply of the same voltage as the supply voltage for the panel
- 1 predischarge alarm output rated for 2 amps – used to switch incoming voltage
- 1 discharge output, rated for 1 amp, switches incoming panel power supply voltage (supervised for open circuit and earth faults). Capable of activating:
- Up to 3 StatX® aerosol generators, connected in series for 12 volt powered systems
- Up to 8 StatX® aerosol generators for 24 volt powered systems
The MV Panel:
- Supports automatic fire detection and alarm functionality
- Display provides visual indications of system status, alarms, and faults
- Incorporates a manual discharge switch (fire system discharge) to allow the manual operation of the fire suppression system
- Workboats
- Fishing Vessels
- Tugs, Towboats & Ferries
- Search & Rescue
- Law Enforcement Vessels
- Hi-speed Vessels & Hovercraft
- Combat Craft & Special Ops
- Offshore Rigs & Platforms
- Pleasure Craft
- Electrical Equipment and Cabinets
- Switch and Control Rooms
- Pumps and generators
- Transformer/Inverter enclosures
- Equipment machinery spaces
Electrical field connections:
- IP65 rated Deutsch DT series connectors
Enclosure:
- IP65 rated metal enclosure
Indications:
- Alarm: red LED
- Buzzer
- Discharged: red LED
- Fault: amber LED
- Isolated: amber LED
- Power: FAULT amber LED
- Power: ON green LED
- Predischarge: amber and red LEDs
Inputs:
- 1 detection input suitable for use with Hochiki conventional smoke or thermal detectors, or LHD cable and thermal probes
- 1 discharge confirmation input (latching)
- 2 external power inputs – nominal 12 V or 24 V (8 V DC to 30 V DC)
Manual Controls:
- ACK/TEST: push button used to:
Test (panel idle): Operates all audible and visual indicators and auxiliary output
Acknowledge: Suppresses audible fault and alarm indications - ARM push button with configurable delay timer periods of: 0 (default), 5, 10, 15, 20, 30, 40 and 60 sec
- DIM: Push button used:
In the normal state to adjust the brightness of the LED indicators
In a FAULT state to provide access to the faultfinding diagnostic function (common system faults) - Fault: Fault finding function
- Fire System Discharge: Missilestyle switch
- FUNC.: Push button used in combination with other panel buttons, allows users to perform additional functions
- Isolate: Switch located on panel printed circuit board (PCB).
Used to isolate the discharge output for testing purposes - System Reset: Used to reset panel following fault or alarm indications
Outputs:
- 1 auxiliary output, rated for 2 amps, – used to switch panel incoming power supply voltage (default configuration). The auxiliary output can be configured if desired to provide a continuous DC power supply of the same voltage as the supply voltage for the panel
- 1 predischarge alarm output rated for 2 amps – used to switch incoming voltage
- 1 discharge output, rated for 1 amp, switches incoming panel power supply voltage (supervised for open circuit and earth faults). Capable of activating:
- Up to 3 StatX® aerosol generators, connected in series for 12 volt powered systems
- Up to 8 StatX® aerosol generators for 24 volt powered systems