Share:
FlameRanger FlameRanger
FlameRanger
FlameRanger is a state-of-the-art fully automatic fire fighting system. It takes in signals from one or more of several advanced detection technologies, including IR array flame detectors, thermal imaging cameras, Triple IR (IR3) flame detectors and video analytics—which typically detect the presence of flame within seconds.
Within seconds of detecting a fire, the robotic nozzle automatically begins suppressing the fire with a high volume of water or foam, directly and dynamically on the fire's source, until the fire is extinguished.
- 24/7/365, Fully Automatic Fire Detection & Suppression
- Advanced Flame Detection Technologies to suit your application, including IR3, Thermal Imaging, IR Array & Video Analytics
- Industrial-Robot-Type Brushless DC Motors (BLDC)
- Automatic Control of Valve to Open During Fire, and Close When Extinguished
- Manual Remote Control by Joystick, Phone, Tablet, PC, via Wi-Fi or Internet
- Monitor and Control Networks of FlameRanger Systems from one or more central stations, on- or off-site
- Remote software updates from Unifire
- Numerous Digital & Analogue Inputs & Outputs for Control of System Peripherals
- Detection Technology:
FlameRanger: Tyco FV311 IR Array Flame Detectors
HeatRanger: FireTIR thermal imaging cameras - Number of detectors:
FlameRanger: 2
HeatRanger: 1 - Reacts to Flames:
FlameRanger: Yes
HeatRanger: No - Reacts to Heat Buildup, allowing suppression before presence of flame:
FlameRanger: No
HeatRanger: Yes - Locates the fire in 3D space and specifically targets the flames:
FlameRanger: Yes
HeatRanger: No. Suppresses the pre-defined zone (area) in which the heat sources is located by deploying a spray pattern defined/programmed on site. Up to 8 zones can be defined and programmed - Tracks fire/heat source in real time:
FlameRanger: Yes
HeatRanger: No. Suppresses the area where the heat build-up is detected for a pre- defined amount of time - Dynamically fights the fire (follows flames in real time):
FlameRanger: Yes
HeatRanger: No - Automatic opening of valve:
FlameRanger: Yes
HeatRanger: Yes - Automatic valve shut off:
FlameRanger: Yes, after a pre-programmed delay (e.g. 30 seconds) after flames are no longer detected
HeatRanger: Yes, after a pre-programmed time from commencement - Requires external PC for processing of data from detector:
FlameRanger: No
HeatRanger: Yes - After shut off, remains in stand-by mode and will react to any new alarm signal:
FlameRanger: Yes
HeatRanger: Yes
- 24/7/365, Fully Automatic Fire Detection & Suppression
- Advanced Flame Detection Technologies to suit your application, including IR3, Thermal Imaging, IR Array & Video Analytics
- Industrial-Robot-Type Brushless DC Motors (BLDC)
- Automatic Control of Valve to Open During Fire, and Close When Extinguished
- Manual Remote Control by Joystick, Phone, Tablet, PC, via Wi-Fi or Internet
- Monitor and Control Networks of FlameRanger Systems from one or more central stations, on- or off-site
- Remote software updates from Unifire
- Numerous Digital & Analogue Inputs & Outputs for Control of System Peripherals
- Detection Technology:
FlameRanger: Tyco FV311 IR Array Flame Detectors
HeatRanger: FireTIR thermal imaging cameras - Number of detectors:
FlameRanger: 2
HeatRanger: 1 - Reacts to Flames:
FlameRanger: Yes
HeatRanger: No - Reacts to Heat Buildup, allowing suppression before presence of flame:
FlameRanger: No
HeatRanger: Yes - Locates the fire in 3D space and specifically targets the flames:
FlameRanger: Yes
HeatRanger: No. Suppresses the pre-defined zone (area) in which the heat sources is located by deploying a spray pattern defined/programmed on site. Up to 8 zones can be defined and programmed - Tracks fire/heat source in real time:
FlameRanger: Yes
HeatRanger: No. Suppresses the area where the heat build-up is detected for a pre- defined amount of time - Dynamically fights the fire (follows flames in real time):
FlameRanger: Yes
HeatRanger: No - Automatic opening of valve:
FlameRanger: Yes
HeatRanger: Yes - Automatic valve shut off:
FlameRanger: Yes, after a pre-programmed delay (e.g. 30 seconds) after flames are no longer detected
HeatRanger: Yes, after a pre-programmed time from commencement - Requires external PC for processing of data from detector:
FlameRanger: No
HeatRanger: Yes - After shut off, remains in stand-by mode and will react to any new alarm signal:
FlameRanger: Yes
HeatRanger: Yes