Share:
Senator 200 Senator 200
Senator 200
Kidde Senator 200 is designed to provide very high sensitivity smoke detection, ensuring the very earliest warning of incipient fire with minimum rate of nuisance alarms.
ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex setup. This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.
Upgradable volt-free Fire and Fault relay outputs are available for remote monitoring by local fire detection or BMS systems.
- High sensitivity provided by laser based forward light scatter for reliable early warning
- Combined sampling pipe up to 200m in length (still air)
- Unique ClassiFire® Perceptive Artificial Intelligence system that dynamically adjusts the detector’s operating parameters, allowing for day to day changes in the protected environment and dust separation system contamination
- Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination system
- RS485 communications built in as standard for networking and remote communications
- Large area aspirating smoke detector, up to 2000m2 coverage
Electrical
- Operating voltage: 21.6 to 26.4 VDC
- Current consumption: 450 mA at fan speed 8
Detection
- Detection principle: Laser light scattering mass detection and particle evaluation
- Particle sensitivity range: 0.003µ to 10µ
- Measurement range (%Obs/m): 0.0015% to 25%
- Alarm levels: 4 (Aux, Pre-alarm, Alarm and Alarm 2)
Physical
- Physical dimensions: 427 x 372 x 95mm (W x H x D)
- Net weight: 5.2kg
- Colour: Cream
- Cable entries: 6 x M20
- Material (body): Polycarbonate
Environmental
- Operating temperature: -10 to +60oC (EN54-20)
- Relative humidity: 0 to 90% noncondensing
- Environment: Indoor
- IP rating: IP40
Standards & Regulation
- Certification: EN54-20, FM, UL
Supply
- Voltage: 21.6 to 26.4 Vdc
- Current: 450 mA at fan speed 8
Sampling pipework
- Inlets: 4
- Length: 100m maximum single run (50m in moving air); 200m combined maximum
- Diameter: 27mm OD
- Sampling holes: up to 100 holes
- Exhaust: 1 (optional)
Inputs
- Standard: 3 (programmable)
Outputs
- Standard: 5 - Pre-Alarm, Alarm, Alarm2, Aux Alarm (n/o) and Fault (n/c)
- Rating: 500mA @ 30V
User Interface
- Indicators: LED and LCD
- Navigation: Keypad
- CPR approved
- LPCB approved
- CSIRO approved
- UL & FM approved
- High sensitivity provided by laser based forward light scatter for reliable early warning
- Combined sampling pipe up to 200m in length (still air)
- Unique ClassiFire® Perceptive Artificial Intelligence system that dynamically adjusts the detector’s operating parameters, allowing for day to day changes in the protected environment and dust separation system contamination
- Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination system
- RS485 communications built in as standard for networking and remote communications
- Large area aspirating smoke detector, up to 2000m2 coverage
Electrical
- Operating voltage: 21.6 to 26.4 VDC
- Current consumption: 450 mA at fan speed 8
Detection
- Detection principle: Laser light scattering mass detection and particle evaluation
- Particle sensitivity range: 0.003µ to 10µ
- Measurement range (%Obs/m): 0.0015% to 25%
- Alarm levels: 4 (Aux, Pre-alarm, Alarm and Alarm 2)
Physical
- Physical dimensions: 427 x 372 x 95mm (W x H x D)
- Net weight: 5.2kg
- Colour: Cream
- Cable entries: 6 x M20
- Material (body): Polycarbonate
Environmental
- Operating temperature: -10 to +60oC (EN54-20)
- Relative humidity: 0 to 90% noncondensing
- Environment: Indoor
- IP rating: IP40
Standards & Regulation
- Certification: EN54-20, FM, UL
Supply
- Voltage: 21.6 to 26.4 Vdc
- Current: 450 mA at fan speed 8
Sampling pipework
- Inlets: 4
- Length: 100m maximum single run (50m in moving air); 200m combined maximum
- Diameter: 27mm OD
- Sampling holes: up to 100 holes
- Exhaust: 1 (optional)
Inputs
- Standard: 3 (programmable)
Outputs
- Standard: 5 - Pre-Alarm, Alarm, Alarm2, Aux Alarm (n/o) and Fault (n/c)
- Rating: 500mA @ 30V
User Interface
- Indicators: LED and LCD
- Navigation: Keypad
- CPR approved
- LPCB approved
- CSIRO approved
- UL & FM approved